Threaded Ball Valves & Socket Weld Valves
GVC offers a complete line of threaded end and socket weld end valves in sizes ¼” through 4” with pressures up to 6000 psi.
High Performance Valves
Series BV6000
- Two-piece Body Design
- Locking SS Handle
- Threaded Ends to ANSI B1.20.1 (NPT)
- Optional Seat Weld Available
- Sizes 1/4” - 2”
- High-quality Investment Casting
- 6000 W.O.G (PSI) Design
- NACE Compliant
- ISO 5211 Actuator Mounting Pad
- 1/4” - 1 1/2” Full Port, 2” Reduced Port
- Fire Tested in Accordance with API 607 Standards
- Designed in accordance to B16.34 and API 608
Series FS 525
- Wide Variety of Exotic Alloys such as F316, Hastelloy C, Monel and Carbon Steel
- Full encapsulated body seals
- Self-cleaning, leak tight slotted seat design
- Encapsulated body bolt design
- Fire tested according to API 607 standards (FS525 only)
- Three-piece swing-out design for inline repairability
- Bottom entry live loaded stem design that creates potential energy for the ultimate stem seal for critical service applications
- ISO 5211 integral mounting pad
- Wide choice of seat options such as Peek, TFM, Vespal, Teflon, Nova and Reinforced Teflon
- Floating ball design
- Sizes 1/4” - 2”
- Designed in accordance to B16.34
Series GVD-20
- Two-piece Design Direct Mount for Easy Automation
- Investment Casting for Body and End Cap
- Anti-static Devices for Ball-stem Body
- Double Stem Sealing to Comply with TA-LUFT Codes
- 2000 psi High Performance
- Live Loaded Stem Design for superior sealing design in high cycle applications
- Blowout Proof Stem Design
- Sizes 1/4" - 3"
Series 790
- Double Union Design Ends Eliminate Piping Unions for Quicker, Less Expensive Installation and Maintenance
- Carbon or Stainless Steel material available
- Available end connection socketweld or threaded
- In-line Maintenance is Easily Achieved Through Quick Change Out of the Body Section
- Full Port Design, 3000psi Rated
- Standard TFM Seats and Seals
- Sizes 1/4” - 2”
- Designed in accordance to B16.34
Series FSD525
- Fire tested to API 607 4th edition
- Direct mounting pad for easy automation without bracket and coupler assembly
- 3-piece swing-out design allows for inline repair without disrupting piping
- Interchange connector ends for maximum versatility
- Bottom entry live loaded stem automatically adjusts with pressure and temperature changes
- High cycle stem packing such as NOVA with PEEK thrust washers are available and significantly increase MTBF
- NACE MR0175 compliant
- Fully encapsulated body seals prevent seal rupture in steam or high pressure services
- OSHA compliant locking handle standard
- Self-cleaning, leak-tight slotted seat design
- Wide choice of seat options
- Variety of end combinations
- Floating ball design with anti-static device
- Encapsulated body bolt design protect valve body bolting from hostile environments
- Traceability in the form of heat numbers and CMTRs are available
- Designed in accordance to B16.34
Threaded Ends
Series 800
- One-piece Body Design
- Locking SS Handle
- Blowout Proof Stem
- 1000 W.O.G (PSI) Design
- Carbon or Stainless Steel
- Threaded Ends to ANSI B1.20.1 (NPT)
- Designed in accordance to B16.34
Series 10
- Full port, Two-piece Body
- Blowout Proof Stem
- Adjustable Stem Packing
- 1000 W.O.G (PSI) Design
- Sizes 1/4” - 4”
- High-quality Investment Casting
- Locking SS Handle
- Threaded Ends to ANSI B1.20.1 (NPT)
- Carbon or Stainless Steel
- Designed in accordance to B16.34
Series 20 RP
- Standard Port, Two-piece Body
- High-quality Investment Casting
- Adjustable Stem Packing
- Carbon or Stainless Steel
- Sizes 1/4” - 1” 2000 W.O.G (PSI) Design
- NACE Compliant
- Blowout Proof Stem
- Locking SS Handle
- Threaded Ends to ANSI B1.20.1 (NPT)
- Options of Seat Including: TFM, NOVA, and PTFE
- Designed in accordance to B16.34
Series 20 FP
- Full Port, Two-piece Body
- High-quality Investment Casting
- Adjustable Stem Packing
- Carbon or Stainless Steel
- Sizes 1/4” - 1” 2000 W.O.G (PSI) Design
- NACE Compliant
- Blowout Proof Stem
- Locking SS Handle
- Threaded Ends to ANSI B1.20.1 (NPT)
- Options of Seat Including: TFM, NOVA, and PTFE
- Designed in accordance to B16.34
Series 30
- Full port, Three-piece, Swing Out Design
- Blowout Proof Stem
- Adjustable Stem Packing
- Carbon or Stainless Steel
- 1000 W.O.G (PSI) Design
- Sizes 1/4” - 4”
- NACE Compliant
- Locking SS Handle
- In-line Replaceable
- High-quality Investment Casting
- Available with Threaded, Socket Weld, and Butt Weld End Connection
- Interchangeable Flange Caps Allow for Maximum Versatility and Reduce Required Spare Parts Inventory
Series BV2000
- Uni-body Design
- 2000psi, NACE Compliant
- Threaded Ends to ANSI B1.20.1 (NPT)
- Floating Ball
- Carbon or Stainless Steel available
- Designed in accordance to B16.34
- Sizes 1/4” - 2”
Series BV3705
- Two piece body design
- 1/4” TO 1 1/2” full port
- 2” reduced port
- High quality investment cast stainless steel and carbon steel construction
- OSHA compliant locking stainless steel handle
- ISO 5211 actuator mounting pad
- Threaded ends to ANSI B1.20.1 (NPT)
- 3705 W.O.G (PSI) design
- Optional seal weld available
- Optional firesafe design
- MR-01-75 NACE compliant
- Designed in accordance to B16.34 and API 608
Needle Valves
Series NV 10000
- Packed bonnet style, locked in place with shroud to prevent inadvertent loosening
- Stem constructed of 316SS and features rolled thread for smooth action
- Available in hard or soft seats
- Maximum operating pressure 10000 psi
- End connections in either male or female are available
- Panel mount assembly
- Sizes 1/4” to 1”
